Sunday, April 28, 2013

Pour It On!

Let's learn a new technique!

In addition to brushing on a wash, the paint can be poured! The following blog entries will show how to "pour on" a watercolor background wash.

The painting above of a dogwood bloom is an excellent subject for a pouring technique.

The dogwood was drawn with minimal details and then the white/lighter areas are masked. See the example below.

Once the sketch is complete and the desired areas masked and dry, prepare a wash of the following colors in small cups. Individual size applesauce cups are wonderful for this project. Make a wash using the following colors:

Crimson
Lemon Yellow
Windsor Blue

See the photo below with the prepared paints. These are the only 3 colors that will be needed for the background as the colors will blend to make greens, etc.

Prepare your painting surface. I use the lid of my watercolor palette to catch excess paint as well as placing several layers of paper towels under my paper.

Once your surface is prepared, start by pouring the yellow first diagonally moving from bottom to top and right to left. Then pour the red and pour the blue last. After each pour, pick up the paper and move the color around.

See the photos below for a step by step application of the colors.

Once you are satisfied with the colors, remove the painting and place on clean paper towels to dry.

You've learned how to "pour it on!" This is an excellent method for adding background to large areas and mixing colors on the paper. This technique can be used for large areas of water (such as an ocean or lake), skies, and grass/tree backgrounds. Several shades of the same color can be used for a sky or body of water. Always remember to use the lightest color first and use care when pouring the paint so that the light paint is not covered entirely by the darker colors.

Next blog, we'll work on the dogwood bloom.

Happy Painting!
Karen

Sunday, April 21, 2013

Wild Bouquet

Wild flowers are springing up everywhere! My backyard is a field of wild violets...at least, it was until my husband mowed the lawn. I was able to take the photo above before the mower came through.

So, I decided to do a quick painting of bouquet of violets. I actually did pick some with longer stems and put them in a small vase to enjoy for a little while. Now, the painting will last a little longer.

I wanted an abstract painting with lots of color and flow and little detail. Do not sketch your flowers......let the paint "draw" the painting for you.

To achieve this result, I started with applying clean water with a large flat brush on the entire piece of watercolor paper, I allowed this to dry just until the paper was no longer shiny.

While the paper was drying, I prepared a wash of the following color paints:

-Crimson
-Indian Yellow
-Windsor Blue
-Ultramarine Blue
-Sap Green
-Sepia
-Purple made from mixing Crimson, Windsor Blue, and Ultramarine Blue

Using a large round brush, I dropped the paint onto the wet paper and allowed it to run. Using a mix of the reds, blues, and my purple, I used the shapes that formed when I dropped the paint onto the paper to make my flowers. I helped the shapes out just a little by adding some additional paint in places to create the shapes of the petals. Leave some areas white (unpainted).

Drop in some sap green for the leaves outside the shapes of the flowers and in several spaces in the background

When the flowers are nearly dry, drop in the yellow for the center of the violets...allow this to blend into the petals.

When the flowers and leaves are dry, use a mix of Sap Green, Ultramarine and Sepia to paint in a new stems.



This style of painting is fun and quick to create. It also allows for lots of interesting shapes and colors. Be creative - don't strive for perfection; simply enjoy the colors and the flow of the paint.....be as spontaneous as the wild flowers that spring up overnight and bring such delight!

Make your wild flowers last - even after the lawn has been mowed! Paint a bouquet of wild flowers!

Happy Painting!
Karen

Sunday, April 14, 2013

Cades Cove Grist Mill - The Finishing Touches

The mill, water wheel, water run and the walkway are finished. Now to paint the background trees, foreground grasses , the fence and to add any finishing details that are needed.

Prepare a wash of the following colors for the tree branches and trunks:

-Burnt Umber
-Payne's Gray

Using a round brush, paint in the tree trunks and branches using wet on dry. This can be done freehand; or if you feel more comfortable, lightly pencil in the location of the tree trunks and branches. I used a #4 rounds brush for the trunks and larger branches and then a liner brush for the small branches.

While this dries, prepare a very diluted wash of Burnt Umber and Sepia for the fence posts. Using a #6 round brush, paint the posts using a wet on wet technique. Wet the fence posts with clean water and then paint using the prepared wash. Drop in Burnt Umber and Sepia to deepen some areas for shadows and imperfections in the wood. Allow to dry.

When the tree branches and trunks are dry, use a dry sea sponge and lightly sponge in some areas of foliage using the following colors:

-Lemon Yellow
-Sap Green
-Ultramarine
-Wash of Sap Green and Ultramarine

Vary the colors of the foliage using light and dark to show areas of sunshine and shadow. Sponge across some of the branches.

Using a light touch and lighter colors, sponge in the foreground grasses.

Last Minutes Details:
Allow the painting to dry. Check any areas that you feel may need additional details; such as the logs or the fence. Add any details you feel are needed.

Congratulations! Sign your name - you grist mill is complete!

Until next blog - Happy Painting!
Karen

Sunday, April 7, 2013

Grist Mill - Painting the Water Wheel

Painting the water wheel, window shutters and the small porch over the door as well as adding shadows is our next step.

Prepare a wash of the following colors:

-Burnt Umber
-Payne's Gray
-Sepia

Painting the Water Wheel:
Wet the water wheel with clean water. Add the above prepared colors placing the darker shades in the shaded areas. After this paint dries, go back and deepen the shaded areas to indicate the spokes of the wheel.

Painting the Shutters, Porch, and Water Flume:
While this paint dries, add the finishing touches to the window shutters and the small porch. Using a dry brush and Burnt Umber, add grain lines to the water flume.

Painting the Shadows:
After the water wheel is dry, wet the part of the building surrounding the water wheel and drop in some Burnt Umber to indicate the areas of the building wet from the splashing water. Allow to dry.

Next blog, we will finish our painting - adding the details to the trees and our mill.

Until then - Happy Painting!
Karen

Saturday, March 30, 2013

Happy Easter!

Happy Easter!

May each of you enjoy a joyous Easter Day rejoicing that He is Risen!

We'll continue working on the mill painting on next week's blog!

Until then......Happy Painting!
Karen

Sunday, March 24, 2013

Grist Mill - Painting the Building!

The painting is starting to take shape. Now we will start to work on the mill. I love painting old wooden buildings. Weathered wood is painted using the following colors:

-Burnt Umber
-Payne's' Gray
-Sepia
-Yellow Ochre

The siding of the mill as well as the cedar shake roof is painted with a light touch of color.

Paint only sections at time, allowing each section to dry before painting the next. Watch for shadows as you paint and deepen the color in those areas.

Wet one section with clean water and apply wet on wet using a wash of yellow ochre first. Don't cover the entire area in a solid shade, but allow some areas to be deeper and some lighter. While the paint is still wet, drop in Payne's Gray, Sepia, and Burnt Umber. Use a light touch since weathered wood is usually not a deep shade, but a light shade of gray with undertones of yellows and browns. Deepen the area of the siding near the roof for the shadows made by the overhang of the roof.

Paint the roof in the same manner using deeper shades of gray in some areas where the shakes overlap each other.

After the sides of the mill have dried, paint the door opening and the window opening using a wash of Payne's Gray and Sepia. Leave a section at the entrance of the door a little lighter where the light is able to enter.

The wooden path can be painted next using Payne's Gray and Burnt Umber. Again, paint wet on wet using muted colors and more of the Burnt Umber than the gray.

The water flume is painted wet on wet using a wash of Payne's Gray. Deepen the right side of the flume where it is shadowed.

The logs supporting the flume are painted using the same colors, only a deeper shade since they are in the shadows.

Next blog, we'll add more detail to the painting! Until then....

Happy Painting!
Karen

Sunday, March 17, 2013

Grist Mill - Sky and Trees

The easiest way to paint a watercolor landscape is to work from the back to the front of the painting. Thus, painting the sky and background trees before working on the actual structure.

The painting is set in early summer; therefore, I selected colors for the foliage and the sky that would be seen that time of year.

I did not mask out any of the areas and simply painted around the posts. Watercolor paint, when painted on a flat surface, will not run into dry areas. Therefore, you can paint around the support posts on the walkway without having to mask them out.

Sky:
I used a light wash of Windsor Blue. First, wet the entire area of the background including the tree area as well as the sky. Prepare your wash first and paint wet on wet. I pulled the paint down into the tree area and allowed the wash to lighten as it grew closer to the horizon. Painting all the way down allows for some blue sky to show through the tree foliage.

Trees/Brush:
While the sky is still slightly wet, drop in the paint for the trees. I prepared the following paint:

Lemon Yellow
Sap Green
Deep green - made from a mix of sap green and ultramarine blue

Using a round brush, paint in the trees using the lighter and darker colors as well as the yellow to indicate new leaf growth. Let the blue sky show through in a few areas.

The foliage and bush in the foreground is painted using the same colors, but with more yellow.

Allow to dry. Next blog, we'll work on the old mill. Until then.....

Happy Painting!
Karen

Sunday, March 10, 2013

Cable Grist Mill in Cades Cove


The photo above was taken last summer at the Cable Grist Mill in Cades Cove in the Great Smoky Mountains National Park. I enjoy painting old barns and buildings and I thought this might be a fun painting. I always take a camera with me or at least have my cell phone to snap a photo of anything that I might enjoy painting later.

When taking photos of subjects to paint, don't worry if the scene is not exactly the way you would like, or if there may be people in the painting. That's where you take control. As the artist, paint the picture the way you would like - with or without people, trees where you want one or exclude a tree that may be in the way.

The photo at the top of the blog was cropped to make it easier for me to paint exactly what I wanted to paint. I excluded the people in the doorway as well as a few tree limbs on the right side of the painting. I cropped the extra "landscape" around the mill because I wanted the focus to be on the mill itself.

Once you decided what to paint, lightly sketch the mill using little detail on the structure.

Next blog, we'll start painting - the background first! Until next time, enjoy sketching and get ready to paint.

Happy Painting!
Karen

Sunday, March 3, 2013

Low Maintenance - Finishing Touches!

The only parts of the painting left are the background trees, the fence posts, and a little more detail in the grasses.

Trees:
If you masked your trees when painting the background, remove the masking. If you used masking tape, simply peal off carefully, being cautious to not rough up the paper. If you used masking fluid, use an eraser and rub across the masking fluid. Once the masking has been removed, apply clean water over the trucks and large limbs of the trees. While still wet, apply a wash of Payne's Gray on the right side and allow the water to pull the paint across the truck. After this has dried, use a small round brush and apply lines to indicate the sections of bark. Paint the smaller limbs on the tree in a wash of Payne's Gray.

Prepare a wash of Burnt Umber to paint in trunks and branches in the background using a light touch.

When the trees are dry, prepare a wash of Burnt Umber, Burnt Sienna and Yellow Ochre. Using a sea sponge, sponge in these colors sparingly for the leaves that are remaining on the trees.

Fence Posts
Prepare a wash of Burnt Umber, Burnt Sienna, Payne's Gray, and Ultramarine Blue. Apply clean water to the posts and while still wet drop in the colors listed above in a random pattern. Use a small piece of plastic wrap "scrunched up" to fit the posts. Use a small piece of masking tape to hold the plastic wrap in place until dry. When dry, remove the plastic wrap and you will find tree bark posts painted for you - thanks to the plastic wrap!

Foreground Grasses
Using a wash of Yellow Ochre and Burnt Umber, deepen the grassy area whee needed for shadows and spatter a little of the paint across the foreground grass to add interest.

Review the painting for any finishing touches or details you would like to add. Sign your name - you have finished another great painting!

Until next blog......... Happy Painting!

Karen

Sunday, February 24, 2013

Low Maintenance - Foreground: Brush and Grasses

Since this painting is set in early fall, the grasses are no longer green, but have turned yellow with some weeds and brush already dry and brown.

Prepare the following colors before you wet the paper:

Yellow Ochre
Burnt Sienna
Burnt Umber
Sepia

Apply clean water to the area around and in front of the barn. While still wet using either a flat brush or a round brush paint in yellow ochre leaving some areas lighter than others. Drop in a mixture of burnt umber, burnt sienna, and sepia in the foreground and in other areas to indicate shadows and tall brush or dried grasses.

Use a light wash of burnt umber at the base of the barn and under the wagon wheels for shadows.

In the foreground, use the edge of a small piece of a credit card in the areas where you have dropped n the darker colors of burnt umber and sepia and pull up and out, drawing the paint into the crevices you created with the credit card. This must be done while the area is still wet. Refer to the photo above for placement.

Allow to dry and deepen any areas you feel may need additional shadows.

Next blog, we'll finish up with our background trees and a few finishing touches.

Happy Painting!
Karen